Roland Sturm
ABSTRACT
The simulation-based layout planning of automated material handling systems (AMHS) for microelectronics and semiconductor manufacturing demands adequate simulation models. An approach for measuring and quantifying the AMHS layout performance of alternative planning variants is required. Fraunhofer IPA has developed simulation methods and a three level approach for calculation of AMHS performance metrics. This approach is very efficient when comparing alternative planning variants, although the difference in the configuration change is very small. The paper outlines the planning approach for two typical AMHS designs used for interbay transportation in 200mm wafer fabs. The models used are generic and can be adapted easily to different AMHS solutions.
- Beamon B., 1999. System Reliability and Congestion in a Material Handling System. Computers&Industrial Engineering No.36: 673--684. Google Scholar
Digital Library
- Cardarelli, G. R., Pelagagge, P. M., and Granito, A. 1996. Performance Analysis of Automated Interbay Material Handling and Storage Systems for Large Wafer Fab. Robotics&Computer Integrated Manufacturing Vol.12 No.3: 227--234.Google ScholarCross Ref
- Glüer, D. 2002. Issues for Automation in Semiconductor Manufacturing. In: at - Automatisierungstechnik, Volume 50, Issue 01, 28.Google Scholar
- Norman, M. 2002. A Recursive Method for Traffic Management through a Complex Path Network. Proceedings of the 2002 Winter Simulation Conference, 537--541. Google ScholarDigital Library
- Sturm, R., Seidelmann, J., Reddig, K. 2003. Simulation-based Planning of Automated Material Handling Systems for IC Manufacturing Industries. wt Werkstatt-stechnik online Vol. 93 (2003) Issue 3.Google Scholar
- Sturm, R., Reddig, K. 2002. Simulation of AMHS in Transient Manufacturing Scenarios. Proceedings of Brooks Automation Symposium 2002.Google Scholar
Recommendations
Automated material handling systems: a simulation-based design framework for automated material handling systems in 300mm fabrication facilities
WSC '03: Proceedings of the 35th conference on Winter simulation: driving innovationThis paper describes a methodology to tackle the problem of designing Automated Material Handling Systems (AMHS) for 300mm wafer fabrication facilities. The proposed framework divides the design process into two levels: architectural and elaborative. ...
Automated material handling systems: automated reticle handling: a comparison of distributed and centralized reticle storage and transport
WSC '03: Proceedings of the 35th conference on Winter simulation: driving innovationThe implementation of Automated Material Handling Systems (AMHS) in 300mm semiconductor facilities provides the opportunity to realize significant benefits in fabricator productivity and performance. The leverage associated with automated reticle ...
Capacity analysis of automated material handling systems in semiconductor fabs
WSC '04: Proceedings of the 36th conference on Winter simulationA critical aspect of semiconductor manufacturing is the design and analysis of material handling and production control polices to optimize fab performance. As wafer sizes have increased, semiconductor fabs have moved toward the use of automated ...
Comments