ABSTRACT
In this paper, we describe the design and development of shapeable figures filled with polystyrene beads. We discovered we could create solid objects by the extraction of air from a container filled with small polystyrene beads. These objects were easy to shape. They also maintained their shapes after formation. We collected feedback about the formability of these objects by the insertion of pressure sensors. We were also able to control other devices, such as LEDs and DC motors, based on data collected by the pressure sensors. When we controlled the DC motor, we were able to regulate the air pump's power. This allowed us to control the objects' hardness by modulation of the volume of the air inside them.
Our method can be employed with applications that require shape manipulation. We applied this method in the construction of a doll figure and a boot. We used "stuffing beads" to create a larger doll shape that can function as a bone inside the doll. The doll prototype's shape could be changed manually. The boot could be adjusted to fit the shape of the user's leg.
- Ben Piper, Carlo Ratti, and Hiroshi Ishii. Illuminating clay: a 3-d tangible interface for landscape analysis. Proc. of CHI'02, pp.355--362, NY, 2002. ACM. Google ScholarDigital Library
- Toshiki Sato, Yasushi Matoba, Nobuhiro Takahashi, Hideki Koike, Interactive surface that can dynamically change the shape and touch sensation, ITS'11 Proc. of the ACM International Conference on Interactive Tabletops and Surfaces, pp.1--1, 2011. Google ScholarDigital Library
- Mama Sofa http://i-mi.org/works/mama_j/concept.htmlGoogle Scholar
- Versa From Plus Positioning Pillows http://www.rehabmart.com/product/versa-form-plus-positioning-pillows-8946.htmlGoogle Scholar
- Edwards Carolyn Pope, Three Approaches from Europe: Waldorf, Montessori, and Reggio Emilia, Early Childhood Research & Practice, vol.4, no.1, Spring, 2002.Google Scholar
- Mitchel Resnick, Fred Martin, Robert Berg, Rick Borovoy, Vanessa Colella, Kwin Kramer, Brian Silverman, Digital Manipulatives: New Toys to Think With, Proc. of CHI'98, pp.281--287, 1998. Google ScholarDigital Library
- INFOOT http://www.iwl.jp/ja/main/infoot_std.htmlGoogle Scholar
Index Terms
- Development of and experimentation on deformable three-dimensional figures by the use of polystyrene beads, a pressure sensor, and an air pump
Recommendations
Development of high temperature resistant of 500 °C employing silicon carbide (3C-SiC) based MEMS pressure sensor
AbstractThis works reports a packaged MEMS capacitive pressure sensor (CPS) employing single crystal 3C-SiC thin film as a diaphragm. The details of the design and fabrication steps involved bulk micromachining process. The 3C-SiC-on-Si wafer is back-...
RETRACTED ARTICLE: A MEMS packaged capacitive pressure sensor employing 3C-SiC with operating temperature of 500 °C
AbstractThis study develops the prototype of a micro-electro-mechanical systems (MEMS) packaged capacitive pressure sensor employing 3C-SiC thin film as a diaphragm. The details of the design and fabrication steps involved bulk micromachining process. The ...
Three-dimensional pattern transfer on quartz substrates
This paper describes a single-step pattern transfer process for three-dimensional (3D) structures onto quartz substrates. The 3D patterns were defined on a negative resist (ma-N2403) using variable controlled acceleration voltage in the electron beam ...
Comments