Abstract
Additive manufacturing (3D printing) is commonly used to produce physical models for a wide variety of applications, from archaeology to design. While static models are directly supported, it is desirable to also be able to print models with functional articulations, such as a hand with joints and knuckles, without the need for manual assembly of joint components. Apart from having to address limitations inherent to the printing process, this poses a particular challenge for articulated models that should be posable: to allow the model to hold a pose, joints need to exhibit internal friction to withstand gravity, without their parts fusing during 3D printing. This has not been possible with previous printable joint designs. In this paper, we propose a method for converting 3D models into printable, functional, non-assembly models with internal friction. To this end, we have designed an intuitive work-flow that takes an appropriately rigged 3D model, automatically fits novel 3D-printable and posable joints, and provides an interface for specifying rotational constraints. We show a number of results for different articulated models, demonstrating the effectiveness of our method.
- Alavala, C. R. 2010. CAD/CAM: Concepts and Applications. Prentice-Hall.Google Scholar
- Autodesk, 2012. Maya User Guide: Rigging.Google Scholar
- Bächer, M., Bickel, B., James, D. L., and Pfister, H. 2012. Fabricating articulated characters from skinned meshes. ACM Trans. Graph. (Proc. SIGGRAPH) 31, 4 (July), 47:1--47:9. Google ScholarDigital Library
- Bailey, M. 2005. Layered manufacturing for scientific visualization. Commun. ACM 48, 6 (June), 42--48. Google ScholarDigital Library
- Bickel, B., Bächer, M., Otaduy, M. A., Lee, H. R., Pfister, H., Gross, M., and Matusik, W. 2010. Design and fabrication of materials with desired deformation behavior. ACM Trans. Graph. 29, 4 (July), 63:1--63:10. Google ScholarDigital Library
- Chen, Y., and Zhezheng, C. 2011. Joint analysis in rapid fabrication of non-assembly mechanisms. Rapid Prototyping Journal 17, 6, 408--417.Google ScholarCross Ref
- Dimitrov, D., Schreve, K., and de Beer, N. 2006. Advances in three dimensional printing state of the art and future perspectives. Rapid Prototyping Journal 12, 136--147.Google ScholarCross Ref
- FigurePrints LLC, 2012. Figureprints. http://www.figureprints.com.Google Scholar
- Fischler, M., and Bolles, R. 1981. Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography. Communications of the ACM 24, 6, 381--395. Google ScholarDigital Library
- Gibson, I., Rosen, D. W., and Stucke, B. 2009. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer. Google ScholarDigital Library
- Kodama Studios, 2012. My robot nation. http://www.myrobotnation.com/.Google Scholar
- Lau, M., Ohgawara, A., Mitani, J., and Igarashi, T. 2011. Converting 3D furniture models to fabricatable parts and connectors. ACM Trans. Graph. 30, 4 (Aug.), 85:1--85:6. Google ScholarDigital Library
- Laurentis, K. J. D., and Mavroidis, C. 2004. Rapid fabrication of a non-assembly robotic hand with embedded components. Assembly Automation, 24, 394--405.Google ScholarCross Ref
- Lee, K. 1999. Principles of CAD/CAM/CAE Systems. Prentice Hall. Google ScholarDigital Library
- Leondes, C. T., Ed. 2003. Computer Aided and Integrated Manufacturing Systems, Volume 4: Computer Aided Design/Computer Aided Manufacturing (CAD/CAM). World Scientific.Google Scholar
- Lipson, H., and Pollack, J. B. 2000. Automatic design and manufacture of robotic lifeforms. Nature 406, 6799, 974--978.Google Scholar
- Lipson, H., Moon, F., Hai, J., and Paventi, C. 2005. 3-d printing the history of mechanisms. Journal of Mechanical Design 127, 123--132.Google ScholarCross Ref
- Lo, K.-Y., Fu, C.-W., and Li, H. 2009. 3D polyomino puzzle. ACM Trans. Graph. 28, 5 (Dec.), 157:1--157:8. Google ScholarDigital Library
- MakieLab, 2012. MakieLab. http://www.makielab.com/.Google Scholar
- Mavroidis, C., DeLaurentis, K., Won, J., and Alam, M. 2001. Fabrication of non-assembly mechanisms and robotic systems using rapid prototyping. ASME Journal of Mechanical Design 123, 4, 516--524.Google ScholarCross Ref
- McMains, S., Bailey, M., and Crawford, R. 2005. Layered manufacturing as a graphics display device. In ACM SIGGRAPH 2005 Courses, ACM, New York, NY, USA, SIGGRAPH '05. Google ScholarDigital Library
- Mitra, N. J., and Pauly, M. 2009. Shadow art. ACM Trans. Graph. 28, 5 (Dec.), 156:1--156:7. Google ScholarDigital Library
- Mitra, N. J., Yang, Y.-L., Yan, D.-M., Li, W., and Agrawala, M. 2010. Illustrating how mechanical assemblies work. ACM Trans. Graph. 29 (July), 58:1--58:12. Google ScholarDigital Library
- Rajagopalan, S., and Cutkosky, M. 2003. Error analysis for the in-situ fabrication of mechanisms. Journal of Mechanical Design 125, 4, 809--822.Google ScholarCross Ref
- Shoemake, K. 1985. Animating rotation with quaternion curves. ACM SIGGRAPH computer graphics 19, 3, 245--254. Google ScholarDigital Library
- Sims, K. 1994. Evolving virtual creatures. In Proceedings of the 21st annual conference on Computer graphics and interactive techniques, ACM, New York, NY, USA, SIGGRAPH '94, 15--22. Google ScholarDigital Library
- Stava, O., Vanek, J., Benes, B., Carr, N., and Měch, R. 2012. Stress relief: improving structural strength of 3D printable objects. ACM Trans. Graph. (Proc. SIGGRAPH) 31, 4 (July), 48:1--48:11. Google ScholarDigital Library
- Stemp-Morlock, G. 2010. Personal fabrication. Commun. ACM 53, 10 (Oct.), 14--15. Google ScholarDigital Library
- Thingiverse, 2012. http://www.thingiverse.com/search?q=gears.Google Scholar
- Thompson, R. 2007. Manufacturing Processes for Design Professionals. Thames & Hudson.Google Scholar
- Won, J., Laurentis, K. J. D., and Mavroidis, C. 2000. Rapid prototyping of robotic systems. In ICRA, IEEE, 3077--3082.Google Scholar
- Xin, S., Lai, C.-F., Fu, C.-W., Wong, T.-T., He, Y., and Cohen-Or, D. 2011. Making burr puzzles from 3D models. ACM Transactions on Graphics (SIGGRAPH 2011 issue) 30, 4 (August), 97:1--97:8. Google ScholarDigital Library
- Xu, W., Wang, J., Yin, K., Zhou, K., van de Panne, M., Chen, F., and Guo, B. 2009. Joint-aware manipulation of deformable models. ACM Trans. Graph. 28, 3 (July), 35:1--35:9. Google ScholarDigital Library
Index Terms
- 3D-printing of non-assembly, articulated models
Recommendations
FabHydro: Printing Interactive Hydraulic Devices with an Affordable SLA 3D Printer
UIST '21: The 34th Annual ACM Symposium on User Interface Software and TechnologyWe introduce FabHydro, a set of rapid and low-cost methods to prototype interactive hydraulic devices based on an off-the-shelf 3D printer and flexible photosensitive resin. We first present printer settings and custom support structures to warrant the ...
Design of a Multimaterial 3D-Printed Soft Actuator with Bi-directional Variable Stiffness
Towards Autonomous Robotic SystemsAbstractA multi-material 3D printed soft actuator is presented that uses symmetrical, parallel chambers to achieve bi-directional variable stiffness. Many recent soft robotic solutions involve multi-stage fabrication, provide variable stiffness in only ...
One-Shot 3D Printed Underactuated Gripper
Towards Autonomous Robotic SystemsAbstractUnderactuated gripping mechanisms allow a wide range of objects to be grasped, with relatively simple control and input. Current 3D printed underactuated grippers are often composed of multiple parts that need assembly before use. Consolidating ...
Comments