Rashid Farivar
ABSTRACT
The performance of system-on-chips can be severely degraded if noisy circuits interfere with sensitive circuits through the common silicon substrate. Many methods have been proposed to suppress such substrate noise, ranging from designing circuits that generateless noise to using guard bands to prevent noise from reaching the sensitive parts. In this paper we have investigated a proposed method for substrate noise suppression using active circuitry, and compared it with two passive methods; resistive grounding and capacitive decoupling. Published results indicate that active noise suppression outperforms passive noise suppression. However, these results are based on simulations using over simplified substrate models, like single node or resistor T-models. In this paper we confirm these previous results, but we also show that when using a more realistic substrate model these advantages disappear! We claim that there is no noticeable difference between active noise suppression and DC grounding; these two methods are comparable and better than capacitive decoupling. The substrate resistivity in system-on-chip solutions typically result in large substrate resistances that decrease the efficiency of active decoupling compared to simple DC grounding.
- A. Matsuzawa, "High quality analog CMOS and mixed signal LSI design," in IEEE Int. Symp. on Quality Electronic Design, 2001, pp. 97--104. Google Scholar
Digital Library
- T. Kadoyama, N. Suzuki, N. Sasho, H. Iizuka, I. Nagase, H. Usukubo, and M. Katakura, "A complete single-chip GPS receiver with 1.6-V 24-mW radio in 0.18μm CMOS," IEEE Journal of Solid State Circuits, vol. 39, no. 4, pp. 562--568, Apr. 2004.Google ScholarCross Ref
- T. Tsukada, Y. Hashimoto, K. Sakata, H. Okada, and K. Ishibashi, "An on-chip active decoupling circuit to supress crosstalk in deep-submicron CMOS mixed-signal SoCs, - IEEE Journal of Solid State Circuits, vol. 40, no. 1, pp. 67--79, Jan. 2005.Google ScholarCross Ref
- K. Makie-Fukuda, S. Maeda, T. Tsukada, and T. Matsuura, "Substrate noise reduction using active guard band filters in mixed-signal integrated circuits," in Symposium on VLSI Circuits. Digest of Technical Papers, 1995, pp. 33--34.Google Scholar
- S. Kristiansson, F. Ingvarson, S. P. Kagganti, N. Simic, M. Zgrda, and K. O. Jeppson, "A surface potential model for predicting substrate noise coupling in integrated circuits," IEEE Journal of Solid State Circuits, vol. 40, no. 9, pp. 1797--1803, Sept. 2005.Google ScholarCross Ref
- "Advanced Design System (ADS)," Agilent Technologies, http://www.eesof.tm.agilent.com/products/adsoview.html.Google Scholar
- N. Simic, F. Ingvarson, S. Kristiansson, M. Zgrda, and K. O. Jeppson, "A high-frequency extension of a surface-potential-based model for noise coupling analysis," in Int. Conference on Microelectronics (MIEL), May 2006.Google Scholar
Index Terms
- Evaluation of using active circuitry for substrate noise suppression
Recommendations
Design Optimization of Active Shield Circuits for Digital Noise Suppression Based on Average Noise Evaluation
A design optimization of active shield circuit using noise averaging method is proposed. The relation between the averaged noise and the design parameters of the active shield circuit such as circuit gain and on-chip layout is examined. A simple design ...
Active Shield Circuit for Digital Noise Suppression in Mixed-Signal Integrated Circuits
An active shield circuit which effectively reduces the substrate noise on the entire area inside the guard ring regardless of the noise source position is proposed. Simulation result shows that the proposed circuit can reduce the noise level to -85 dB ...
Prediction of the impact of substrate coupled switching noise on frequency synthesizers
This paper proposes a methodology to accurately predict the phase noise effects in frequency synthesizers as a consequence of switching noise coupled through the substrate. The method proposed is based on a phase model of a frequency synthesizer where ...
Comments